GE Dishwasher Error Codes — Complete List (2026)
Fix your GE dishwasher with our complete error code guide. Find what each code means and how to resolve common issues.
GE Dishwasher Error Codes
Use this guide to diagnose and fix your GE dishwasher. Find your error code below for the cause and solution.
Common Error Codes
| Code | Meaning | Solution | |------|---------|----------| | C1 | Drain issue | Check drain hose, filter, and garbage disposal | | C2 | Drain timeout | Clear blockage, check drain pump | | C3 | Drain motor issue | May need drain pump replacement | | C4 | Fill problem | Check water supply valve is open | | C5 | Fill timeout | Check inlet valve and water pressure | | C6 | Water temperature issue | Check water heater, may need heating element | | C7 | Turbidity sensor | Clean sensor or replace | | C8 | Detergent dispenser | Check dispenser mechanism | | PrS | Pressure sensor | Service required | | 888 | Display test mode | Press Start to exit |
How to Reset GE Dishwasher
Method 1: Button Reset
- Press and hold Start/Reset for 3 seconds
- Wait for cycle to cancel
- Close door and start new cycle
Method 2: Power Reset
- Turn off dishwasher at circuit breaker
- Wait 60 seconds
- Turn power back on
- Start new cycle
When to Call Service
Contact GE at 1-800-432-2737 if:
- Error code persists after reset
- Water is leaking
- Strange noises during operation
- Error codes C3 or PrS appear
👉 GE Support — Schedule service online
Download GE Dishwasher Manual
👉 GE Manuals — Enter your model number
Looking for a new dishwasher? Browse scratch and dent GE dishwashers at up to 40% off.
Frequently Asked Questions
How do I reset my GE dishwasher?
Press and hold the Start/Reset button for 3 seconds, or turn off the circuit breaker for 1 minute.
What does GE dishwasher code C1 mean?
C1 indicates a drain issue. Check the drain hose, garbage disposal knockout, and filter for blockages.
Why is my GE dishwasher beeping?
Beeping usually indicates an error code. Check the display for a code and refer to the guide below.