Samsung Dryer Error Codes

| Code | Meaning | Solution | |------|---------|----------| | HE/hE/HE1 | Heating error | Check element, thermal fuse | | tS/tO | Temperature sensor | Replace thermistor | | dF/dC | Door open | Close door, check latch | | FE | Power frequency error | Check power supply | | bE | Button stuck | Check control panel | | 9E1 | Power supply error | Check outlet, may need service | | 9C1 | Communication error | Reset power | | Clg | Vent blockage | Clean vent, check exhaust | | HC | Gas ignition fail | Check igniter, gas supply | | Et | Key error | Check control board | | FC | Filter clogged | Clean lint filter |

How to Reset Samsung Dryer

Press Power to turn off
Unplug from outlet
Wait 1-5 minutes
Plug back in
Turn on and test

Samsung Dryer Not Heating?

Check these in order:

Lint filter — Clean before each load
Vent hose — Clear any blockages
Thermal fuse — May need replacement
Heating element — Test with multimeter

📞 1-800-726-7864 — Samsung support (24/7)

👉 Samsung Support — Schedule repair

Shop Samsung scratch and dent dryers at up to 40% off.

Frequently Asked Questions

What does HE mean on Samsung dryer?

HE indicates a heating error. Check the heating element, thermal fuse, and gas igniter (gas models).

How do I reset my Samsung dryer?

Turn off the dryer, unplug for 1-5 minutes, then plug back in and restart.

What does tS mean on Samsung dryer?

tS indicates a temperature sensor issue. The thermistor may need replacement.